Large format
Grommet marks and roll nesting for large-format printing
Two jobs every banner shop does by hand, done on the file: PrintFiles places banner grommet marks evenly from the finished size with the hems included, and nests banners and posters side by side along the roll so you print one length instead of many strips.
Files are processed in your browser and never uploaded.
What the large format tool does
- Grommet (eyelet) marks from the finished size, corners first
- Even spacing with hems per edge; edges on or off
- Nesting of many PDFs and quantities along the roll
- Shelf packing for straight cuts, or MaxRects for tighter fits; pieces may turn
- Roll width choice, metres used and utilisation
- Roll PDF in pages of up to 5 m, with cut ticks
- Pieces measured from the files, never scaled
Why print shops use it
- Eyelets in the right place
- Evenly spaced from the corners, with the hem allowed for, before the banner leaves the printer.
- Less media waste
- Several jobs share one roll length; the plan shows metres and utilisation before you print.
- Straight cuts
- Shelf layouts keep cut lines straight across the roll when speed matters more than the last centimetre.
Who it is for
- Banner and signage printers
- Large-format shops running mixed jobs on one roll
- Event branding and outdoor advertising printers
The problems it removes
- Grommets punched at uneven spacing.
- Printing three jobs as three separate roll runs.
Instead of the RIP’s nesting or a tape measure
Caldera Nest-O-Matik and ONYX nesting do this inside the RIP; many shops still mark grommets with a tape measure. PrintFiles does both on the PDF before it reaches any RIP.
No wide-format printer yet? You can order banner printing in Kenya instead.
Large format: questions
- Where do hems come from?
- The file is the print size. Enter the hem allowance and the finished banner is the file less the hem; eyelets are spaced from the finished corners.
- How far apart should grommets be?
- Common practice is roughly every 50 to 60 cm for indoor banners and closer for windy outdoor sites. Set the spacing and PrintFiles distributes the eyelets evenly from the corners.
- Can it nest contour-cut stickers?
- It nests rectangles. True-shape nesting for contour cuts is not built.
Works well with
Try large format on your next job
Try all nine tools free for 7 days, then pay by M-Pesa or card, monthly or yearly.
Start free trial